Workflow Guides
CIPP Pre-Lining Survey Documentation Requirements
Required data for CIPP pre-lining surveys — invert elevations at ±0.02 ft accuracy, pipe condition, manhole schedule, and post-lining verification.
·6 min read
Workflow guides, equipment setup, and practical documentation for grading contractors, underground utility crews, and survey teams.
Required data for CIPP pre-lining surveys — invert elevations at ±0.02 ft accuracy, pipe condition, manhole schedule, and post-lining verification.
Required fields for DOT compaction logs — AASHTO T99 vs T180, nuclear gauge calibration requirements, state-specific formats (TxDOT, CDOT, FDOT), common rejections.
What to do when a compaction lift fails DOT testing — root cause analysis, correction options, re-test requirements, documentation, and cost impact $6,000-12,000/event.
How to verify superelevation on road construction — reading the superelevation diagram, measurement procedure with digital level or total station, ±0.3% tolerance.
Required components of a DOT QC plan — org chart, inspection frequencies, test methods, record retention (10 years federal-aid), digital vs paper acceptance.
Total stations vs GPS rovers vs digital levels for road grade verification — accuracy comparison, cost, speed, and when each is appropriate for DOT work.
What UFC 3-01.01A requires for QC inspection — three-phase system, QC Manager qualifications, preparatory/initial/follow-up inspection requirements, documentation standards.
NAVFAC project documentation — QC records vs RFIs vs submittals, O&M manuals, as-built drawings, QC Manager certification, closeout package requirements.
What a Notice of Non-Compliance costs on government construction — $10K-25K average resolution cost, schedule impact, debarment risk, and how to prevent NCRs.
Complete checklist for UFC three-phase inspections — preparatory, initial, and follow-up inspection items, attendee requirements, and deficiency handling procedure.
EM 385-1-1 safety requirements — Activity Hazard Analysis requirements, safety incident documentation, daily safety records, and how safety violations affect QC standing.
What building departments require for pad certification — PE signature, ±0.10 ft tolerance, California/Texas/Arizona requirements, and common rejection triggers.
In-depth guides for specific contractor verticals
Solar Farm Construction
Pile elevation verification, EPC conformance documentation
8 guides →
Airport Construction
FAA AC 150/5370-10 grade documentation requirements
5 guides →
Underground Utilities
Sewer as-built documentation and pipe grade verification
7 guides →
Road & Highway
DOT compaction documentation and grade verification
9 guides →
Military & Government
UFC three-phase inspection and USACE/NAVFAC QC
5 guides →
Land Development
Pad certification, detention ponds, and easement as-builts
9 guides →
Earthwork
Stockpile volumes, topsoil stripping, and grade documentation
4 guides →
Pipeline
HDPE grade verification and water main as-built requirements
3 guides →
Concrete Flatwork
Post-tension slabs, tilt-up panels, and F-number documentation
5 guides →
Machine Control
GPS machine control calibration and grade documentation
4 guides →
Field Documentation
Daily reports, inspection checklists, and stakeout documentation
4 guides →